[ Before upgrade ]

1. Make sure the clock is set correctly (set to current time). To set clock : Menu > Settings > Timer > Clock
2. Connect X5 to computer via USB cable. Unzip the downloaded firmware, and copy the 'X5_fw.bin' file to 'Firmware' folder of X5.
   
3. Disconnect all cables including USB and Power from X5. Wait until X5 shuts off.
4. Connect power cable to X5 to start firmware upgrade.
5. When upgrade completes, disconnect power cable from X5.

[ After the upgrade ]
	To check for proper installation, Check your "Windows Explorer" and select "My Computer". Now locate the IAUDIO X5 icon, once you double click the icon it should display 2 folders. Folders are named "Data" and "Media". If you double click the "Media folder" it should display all of the files within your X5.

[ For music store downloads (Use X5 as MTP device)]

1. Launch the online music store application. (e.g. Napster, Yahoo music, etc)
2. Turn X5 on.
3. Use the USB Host Port to connect X5 to computer. USB Host Port is located on the left side of X5. (Do not connect it through USB port in subpack/cradle)
   
4. Make sure the online music store application recognizes X5.
5. Drag & Drop music files to X5. (Music transfer operation may differ by online stores)

* Known Bugs
	X5 may not be recognized by windows due to some technical issues. In such occasion, restart windows and try again.
	'No License to Play' warning may appear during music playing. In such occasion, wait few minutes and try again.

* Notice
	Please note that current Beta firmware will only support Windows XP and Windows Media Player 10.
	If you do use this firmware you will need to use the USB Host Port to transfer files via Napster, Yahoo, Rhapsody programs etc, and or through Windows Media Player 10.
	X5 will not charge while plugged into the USB host port, so we would advise that you use the AC adapter while transferring as it will drain the battery during transfers.